How do I fix error code 0x80070035?

In this article, we are going to explain how to Fix “Error Code 0x80070035 the network path was not found”.  Microsoft Window allows users to share files between computers which are on the same network. But sometimes when a user tries to access a shared network, the system shows a message:

Solution: Error code 0x80070035. The network path was not found

We are going to explain three methods to fix this problem. You need to restart your computer after completing each method.

1. Fix Network Error 0x80070035 in Services

1. Open start menu on windows and search services.
2. Go ahead and click to open services.
   
   
   
3. In the services page, now scroll down until you find TCP/IP NetBIOS Helper service.
   
   
   
4. Double-click on TCP/IP NetBIOS Helper service.
5. Now change the startup type to Automatic, if the service status is not running just click on start. (shown in the image below).
   
   
   
6. Now click Apply and Ok.
7. Now Restart your computer and see if this has solved the problem.

2. Fix through Registry Editor

1. Open start menu on windows and search regedit.
2. Now Right-click on Registry Editor and Run as administrator as shown below in the picture below.
   
   
   
3. Just click Yes if you see User Account Control prompt.
4. I would suggest you create a Backup in Registry Editor before proceeding to next steps. That’s very simple, just click on File in the top left and tap on Export and save it to your computer. (shown below in the image).
   
   
   
5. Now expand HKEY_LOCAL_MACHINE by clicking on arrow in front of it (as shown below in the image).
   
   
   
6. Now expand Software and then expand Microsoft in the software folder.
7. Now scroll down in Microsoft folder until you find the folder MSLicensing .
8. Now expand MSLicensing and you will find two folders HardwareID and Store (as shown in the image below).
   
   
   
9. Right-click on HardwareID and delete it, then Right-click on Store and delete it as well.
10. Now restart your Computer.

This should solve the problem, if this hasn’t then you can try one more technique, as explained below:-

Are you the one getting the error code 0x80070035, while connecting your Windows 10 system to another computer? Looking for the fixes to get rid of the – Error code: 0x80070035. The network path was not found. Then read the article to follow the complete fixes.

Microsoft allows the Windows computer to share files between two systems connected to the same network. But some users are encountering the error when trying to share the files and data with each other.

Network Error
Windows cannot access \\sharedNAS
check the spelling of the name otherwise there might be a problem with your network, to try identify and resolve network problems, click Diagnose.
Error code 0x80070035 The network path was not found.

Well, the 0x80070035 Windows 10 error is very irritating, and it is estimated is faced by the users due to antivirus or the Windows Defender Firewall blocks the system resources. So, apply the below-given solutions one by one to troubleshoot error code 0x80070035 The network path was not found. 

How do I Fix Error Code 0x80070035 in Windows 10?

Table of Contents

• Solution 1: Turn off the Antivirus and Firewall
• Solution 2: Check your Drive is Shared
• Solution 3: Try to Reinstall the Network Adapters as well as the hidden adapters
• Solution 4: Enable NetBIOS over TCP/IP
• Solution 5: Delete all Windows Credentials
• Solution 6: Change the Network Security Settings
• Solution 7: Utilize Windows Command Prompt
• Solution  8: Enable Network Discovery
• Solution 9: Add IPv4 protocol over TCP/IP

Solution 1: Turn off the Antivirus and Firewall

In order to turn off the Windows Defender Firewall, follow the below-given steps:

1: First you have to open the control panel, to do this press the Windows + R, and in the Run box type control panel then hit the Enter key.

2: From the list, click on the Windows Defender Firewall then from the left-hand side, click on the Turn Windows Defender Firewall on or off.

3: Now, you have to select the radio button present along with the Turn off Windows Defender Firewall (not recommended). You have to do this task for both the Private and Public network settings.

4: At last, click on the OK to save the settings and reboot your computer.

Solution 2: Check your Drive is Shared

1: Right-click on the drive that you want to access and go to its Properties.

2: Now, navigate to the Sharing tab and verify if the network path displays Not Shared. After it, you have to click on the “Advanced Sharing” option.

3: From the Advanced sharing window, tick marks the box for “Share this folder”. Make sure that you have entered the correct drive name. At last, choose Apply and then Ok to save the modifications.

4:  Next press Windows key + R > to open the command prompt > type the name of the folder > hit Enter. and you are able to access the folder without any error.

Solution 3: Try to Reinstall the Network Adapters as well as the hidden adapters

1: Again open the run dialogue box (Press Windows + R), type devmgmt.msc and press the Enter key. This will open up the Device Manager.

2: Now, click on the View tab present in the Device Manager window and check on the Show hidden devices.

3: You will see the hidden adapters, right-click on all the drivers, and uninstall them.

4: Reboot your computer and check for the issue.

Solution 4: Enable NetBIOS over TCP/IP

This solution worked for many users to fix the Windows 10 explorer network error 0x80070035 the network path was not found. So, follow the steps to enable the NetBIOS over TCP/IP.

1: Open the run box by pressing the Windows + R keys, in the run box you have to type the ncpa.cpl and press the Enter key. This will open up the properties of WiFi.

2: Right-click on the WiFi network and choose the Properties.

3: Now, double-click on the Internet Protocol Version 4 to open the properties.

4: Then, click on the Advanced and navigate to the WINS tab.

At last, from the NetBIOS setting, you have to select the radio button at “Enable NetBIOS over TCP/IP.” Then click on the OK to save the changes.

Solution 5: Delete all Windows Credentials

1: Go to the Control Panel of your system and choose the Credential Manager.

2: From the Windows Credential section, delete all the credentials and reboot your system.

3: If the system asks to enter all Windows credentials then reenter the credential.

I hope this works for you to fix the error code 0x80070035 in Windows 10. But if still struggling with the Windows 10 problem then head to the next solution. 

Solution 6: Change the Network Security Settings

Follow the steps to carefully change the Network Security Settings. 

1: Open the run box (press Windows + R) and type secpol.msc then press the Enter key. This will open up the Local Security Policy window.

2: Go to the Local Policies >> Security Options.

3: From the right pane, you have to double-click and open the properties for Network security: LAN Manager Authentication Level.

4: At last, using the drop-down menu, choose the Send LM & NTLM-use NTLMv2 session security if negotiated.

Solution 7: Utilize Windows Command Prompt

1: Press Win + X and select the Command Prompt (Admin)

2: After it, simply run the given commands one-by-one and hit Enter after each

ipconfig /release

ipconfig /flushdns

ipconfig /renew

3: Restart the system and check for the issue. If you are still unable to solve the error code 0x80070035 then run the following command:

ipconfig /flushdns

nbtstat –r

netsh int ip reset

netsh winsock reset

At last, reboot your system check for the Windows cannot access check the spelling of the name error. 

Solution  8: Enable Network Discovery

Many users confirmed that turning on the network discovery works for them to fix the error 0x80070035 Windows 10.

Follow the steps to do so:

1: Hit Win + R > and in the Run dialog box > type the command control panel and open it

2: Then click and open the Network and Sharing Center.

3: And on the left side in the menu > choose Change Advanced Sharing settings.

4: Next shift radio button to the option Turn on network discovery > checkmark the box that shows Turn on automatic setup of network-connected devices.

5: Lastly, restart your system

Solution 9: Add IPv4 protocol over TCP/IP

Open the run dialogue box (press Windows + R keys), in the run box type ncpa.cpl and press the Enter key.

Now, choose your connection and right-click on it then select Properties.

Find out the box for “The connection uses the following items” and then click on the “Internet Protocol (TCP/IP) Version 4” from the field.

Hit the Install button.

Then, choose “Protocol” and click on Add on the Select Network Feature Type wizard.

When the Network Protocol pop up appears, select the Reliable Multicast Protocol then OK.

It is estimated after following the above-given fixes you are able to fix “check the spelling of the name otherwise there might be a problem with your network” error.

PEOPLE ALSO ASK:

Make Your Windows PC/Laptop Error-Free

If after following the above-given fixes your system starts running slow, crashing, or freezing then it is suggested to scan your system with the PC Repair Tool.

This is an advanced repair utility that fixes various computer problems like stubborn Windows errors, protects your from virus/malware, DLL error, repair corrupt registry entries, and many other errors and issues in the Windows system.

This not only fixes errors but also optimizes the Windows PC performance.

Get PC Repair Tool, to improve Windows PC/laptop performance

Conclusion

It is estimated the article worked for you to fix the Error code 0x80070035, The network path was not found” in Windows 10.

Make sure to type the commands and follow the given solutions carefully, to avoid further issues.

If you are having any comments, suggestions, or queries regarding the one projected than feel free to share with us.

Good Luck..!

Vikash Singh

Always up to help others with their PC-related issues, Jack loves to write on subjects such as Windows 10, Xbox, and numerous technical things. In his free time, he loves to play with his dog “Bruno” and hang out with his friends.

How do I fix network error code 0x80070035?

How do I fix error code 0x80070035 The network path was not found Windows 7 8 Windows 10?

How do I fix network path not found?

How do I restore network path?