How to install m.2 ssd in dell desktop

Symptoms

The original SATA protocol was designed to maximize the performance of platter (physical spinning) hard drives. With the proliferation of SSD drives, the SATA storage management protocol has become a limiting factor. The NVMe (Non-Volatile Memory) protocol has been designed for solid state drives and uses the PCIe bus for optimal performance. An M.2 drive may support SATA or PCIe/NVMe but not both. Depending on the drive and what the computer can support, not all M.2 drives work in all computers.

M.2 storage devices are classified numerically based on performance. The higher the Class, the faster the overall performance:

How to install m.2 ssd in dell desktop


Precision Systems

 
 System   Maximum internal drives supported   Drive configurations supported (max)   PCIe lanes   Parts needed to install a M.2 device into a M.2 slot   Parts needed to install a M.2 device into a 2.5" bay   Additional information 
             
7710
7720
3 3x M.2
1x 2.5"
2x M.2 + 1x 2.5"
M.2 slots support 4X.

2.5" supports 2X.

1x  HR8P8 - Thermal cover (includes cover and thermal pad)
1x  4270E - Screw (secures cover on top of the M.2 drive).
1x 745TM - 2.5" metal bracket (most units already include this part).
1x Y1WJX - M.2 bracket (mounts to 745TM).
4x 2864D - M3X3 screw. (most computers include these. These secure the Y1WJX M.2 drive carrier, or a 2.5" drive into 745TM).
1x WPTND - M.2 Interposer Board. (installs into Y1WJX)
5x 4270E - M2.0*3 L screws
1x HR8P8 - M.2 thermal cover
Find instructions here on the Dell Community Forum.
             
7510
7520
2 1x M.2
1x 2.5"
2x M.2
1x M.2 + 1x 2.5"
M.2 slot supports 4X.

2.5" supports 2X.

  1x  745TM - 2.5" metal bracket (most computers include this part).
1x  Y1WJX - M.2 bracket (mounts to745TM).
4x  2864D - M3X3screw. (most computers include these. These secure the Y1WJXM.2 drive carrier, or a 2.5" drive into 745TM).
1x  WPTND - M.2 Interposer Board. (installs into Y1WJX)
5x  4270E - M2.0*3 L screws
1x  HR8P8 - M.2 thermal cover
Find instructions here on the Dell Community Forum.
             
5510
5520
2 1x M.2
1x 2.5"
1x M.2 + 1x 2.5"
M.2 slot supports 4X.

2.5" bay is wired as SATA.

1x  88DJK - Thermal pad (no plate required)
1x  4270E - M2X3 screw
1x  XDYGX - Cable
2x  3XYT5 - Rubber side isolator
1x  3FDY3 - Metal hard drive bracket (some units may already have this installed even if a 2.5-inch drive was not ordered from Dell originally).
Discussed here on Dell Community Forums
             
3510 1 1x M.2
1x 2.5"
M.2 slot supports 4X.

2.5" bay is wired as SATA.

  1x  X3YR8 - M.2 end bracket
1x  1X2MT - Thermal cover
2x  4270E - M2X3 screws
Discussed here on SpiceWorks
             
3520 2 1x M.2
1x 2.5"
1x M.2 cache drive + 1x 2.5"
M.2 slot supports 4X.

2.5" bay is wired as SATA.

  1x  2FFR0 - End bracket
1x X3DN4-Thermal plate
1x  4270E - End screw
 

Latitude Systems

 
 System   Maximum internal drives supported   Drive configurations supported (max)   PCIe lanes   Parts needed to install a M.2 device into a M.2 slot   Parts needed to install a M.2 device into a 2.5" bay   Additional information 
             
E5270
E5470
E5570
1 1x M.2
1x 2.5"
E5270 supports 2X.
E5570 supports 4X (w/ H processor).
E5570 supports 2X (w/ U processor).
E5470 supports 2X (w/ H or U processor).
2.5" bay is wired as SATA.
  1x  X3YR8 - M.2 end bracket
1x  1X2MT - Thermal cover
2x  4270E - M2X3 screws
 
             
5280
5480
5580
2 1x M.2
1x 2.5"
1x M.2 cache drive + 1x 2.5"
5280 supports 2X.
5580 supports 4X (w/ H processor).
5580 supports 2X (w/ U processor).
5480 supports 4X (w/ H processor).
5480 supports 2X (w/ U processor).
2.5" bay is wired as SATA.
  1x  X3YR8 - M.2 end bracket
1x  1X2MT - Thermal cover
2x  4270E - M2X3 screws
 
             
E7270
E7470
1 1x M.2 M.2 slot supports 2X. 1x  DJ69P - Thermal cover
2x  4270E - Screw M2X3 (most computers include one of these).
  Discussed here on SpiceWorks.
             
7280
7480
1 1x M.2 M.2 slot supports 2X. 1x  R6TGF - Thermal cover
2x  VJYP9 - Screw M2X3 (most computers include one of these).
   

XPS Systems

 
 System   Maximum internal drives supported   Drive configurations supported (max)   PCIe lanes   Parts needed to install a M.2 device into a M.2 slot   Parts needed to install a M.2 device into a 2.5" bay   Additional information 
             
9350
9360
1 1x M.2 M.2 slot supports 4X. 1x 4270E - Screw M2X3    
             
9365  1 1x M.2 M.2 slot supports 4X. 1x 4HP13 - Thermal plate
2x JPRFM - M1.6x2.5 screws
   
             
9550
9560
2 1x M.2
1x 2.5"
1x M.2 + 1x 2.5"
M.2 slot supports 4X.
2.5" bay is wired as SATA.
1x 88DJK - Thermal pad (no plate required)
1x 4270E - M2X3 screw
1x XDYGX - Cable
2x 3XYT5 - Rubber side isolator
1x 3FDY3 - Metal hard drive bracket (some units may include this part even if a 2.5" drive was not ordered from Dell originally).
Discussed here on Dell Community Forums

OptiPlex Systems

  
 System   Maximum internal drives supported   Drive configurations supported (max)   PCIe lanes   Parts needed to install a M.2 device into a M.2 slot   Parts needed to install a M.2 device into a 2.5" bay   Additional information 
             
5040
7040
(MT)
2 1x M.2
1x M.2
1x M.2 + 1x 2.5"
2x 2.5"
1x 3.5"
M.2 slot supports 4X. 1x R7HGK - Thermal pad (installs onto the motherboard under the M.2 drive)

1x YYJF8 - Screw M2X3.5

1x 6J3FV - SATA cable

1x X9FV3 - M.2/2.5" bay adapter/caddy

Motherboard M.2 installation instructions found here.
             
3050
5050
7050
(MT)
2 1x M.2
1x 2.5"
1x 3.5"
2x 2.5"
1x M.2 + 1x 2.5"
1x M.2 + 1x 3.5"
M.2 slot supports 4X.

Installing a M.2 device into the 2.5/3.5" bay is not supported.

1x DHR6X - Spacer (between the motherboard and M.2 drive)   Motherboard M.2 installation instructions found here.

Cause

No Cause Associated.

Resolution

No Resolution Associated.

Latitude 5280/5288, Latitude 7280, Latitude 5480/5488, Latitude 7480, Latitude 5580, Latitude E5270, Latitude E5470, Latitude E5570, Latitude E7270, Latitude E7470, OptiPlex 3050 All-In-One, OptiPlex 3050, OptiPlex 5040, OptiPlex 5050, OptiPlex 7040See more

Can m 2 SSD be used for desktop?

Certain desktop PC peripherals like wi-fi cards can come in the M. 2 form factor, but the most common use for M. 2 is SSD data storage, basically functioning as an alternative to the existing 2.5” storage drives that are mounted in a separate bay and then connected to the motherboard via a SATA cable.

Where is the M 2 slot in my computer?

On desktop PC: Find the M.2 connector on the lower middle of the motherboard > You can see a horizontal slot labeled SATA or PCIe > Remove the mounting screw opposite the slot > Insert the M.2 SSD > Secure the SSD with the screw.

Can I install an SSD in m 2 slot?

Check if your computer support M. 2 slot: PCIe. On desktop, if the SSD interface is marked with SATA/PCIe, it means that you can add an M. 2 SSD to the computer.